A star chip is another common windshield rock chip that has damage that exhibits a series of legs that emanate from the break. Star chips can be front window repair if the chip's total diameter (including legs) does not to exceed 3 inches.
You will next see what is called a parting bead which is a small trim piece about 1/2 inch by 3/4 inch in size partially buried in the window casing. It separates the two sashes. I recommend replacing these and you will find they are very difficult to remove without splintering them. If you are repairing the window and not installing new side tracks you must replace the parting beads. The upper sash and weight removal is the same as the bottom. Don't forget to open the sash pockets at the bottom of the upper sash tracks as well to allow sash weight removals. With sash, weights, nails and pulleys removed, clean all loose paint from remaining surfaces and if your sure it is not lead paint, some sanding may be in order as well.
Check for irregularities. If you're at the fix auto glass or rear of the car, look along the car to see if there are small dents. These can be seen as distortions in the reflection. If the paint is not smooth in one place, then this could be a place where there has been some damage. Dents as large as a coin can be restored by a panel beater. Dents that are not thoroughly repaired are often filled with polyester resin or fibreglass paste. Tap the surface, or go along it with a magnet. Know whether the panel is made of steel, not plastic, fibreglass or aluminum. If there are places where the magnet will not adhere, then in all likelihood, the panel has been repaired. Ask the owner why the part has been repainted?
Techniques are horizontal, vertical or pyramid merchandising. Live merchandising means to set up windshield chip repair a scene or picture like in real life. For example, a fully decorated Christmas table, if you sell home ware and kitchen products. Hero merchandising means focussing on one single product in your window display.
Repeat the process for the opposite side. Set the sash aside making sure you know which is the top and the bottom sash. Place a wood block into the track opening and cut the card knot. The block will help catch the sash weight and allow you to pull it out of the pocket. Remove the pulleys. The pulleys and the weights will no longer be used.
And don't forget your basic holding costs. Holding costs are the gas and electric you use during the time you own the house along with any finance charges if you have any loans. Also don't forget the real estate commission you need to deduct from your selling price. And last, what about your profit? You must figure in your profit just like it was any other expense. If you are planning to make $25,000 or $50,000, you must include it with your estimate. After all, who is more important than you!